Home | Computer | Hardware
This defending cases give dust and fluid protection for computers, thin clients, small form factor Computers so hence the name PC enclosure and computer enclosure, as well in the protective casing a monitor and keyboard can be stored. Now this permits almost any company to deploy factory computer hardware on their manufacturing line from the massive conglomerates through to the small engineering firms this will in turn supply up to the minute status on client orders and even how much wastage has been produced and by which member of staff. These computer enclosures offer a most affordable solution compared to industrial computers than by and large need dedicated software program on them and need set maintenance to be able to call on the warranty in case of technology failure, now this is where PC cases have the lead as they offer all the defense a computer demands from dust and fluid, even in washdown places such as in food processing factories. The case range in specification from IP56 (dust and splash proof) through to IP65 (washdown with high pressure water jets, these are normally manufactured from food quality stainless steel as this is the chief market that requires this type of device. Now the choices are as follows: A standard keyboard can be used and is sited on a rollout ledge so it is only used intermittently, however this hostile situation will still impact on the life of the keyboard, so a cheap device is to use a sealed keyboard with a track ball made into the keyboard and for around $120 come with either USB or PS2 connections. Or for the wash down regions an Nema 4x keyboard can be invested in these are produced from stainless steel and also include a trackball but are wholly certified to be washed down with high pressure water jets. IP65 is also corresponding to NEMA 4X and this is a large market throughout the Britain, Europe and America. Now how are the units cooled? This does depend upon the use, if the unit is to offer dust protection and at the same time be splash proof a traditional thermostatically controlled cooling fan technology can be used however if the casing is going into a freezer division in a food process facility they are fitted them with thermostatic heaters, the ultimate selection is for a NEMA 4X Computer enclosure to be cooled by an air conditioning unit or a cheaper alternative is a cooling tube that provides the same control of cool air whilst at the same time reducing expenditure.
Article Source: http://www.onlinearticlessite.com
Max as developed a protective Computer enclosure as well as an LCD enclosure used in outdoor digital signage and factory environments.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
