Home | Computer | Hardware
Up to that time in process plants we have seen the substitute of the old paper based notice board that you will have seen on the factory floor, now they are using dynamic signs to fill in staff and customers alike with corporate news. Now it seems that this hardware is generating a buzz and the notice board is being replaced by dynamic advertising, many companies who have a production plant are selecting to take out the ancient notice board and put up Flat screen displays, these are then wired on the same data infrastructure that the pc's run off. The digital media is added by the IT department and it can hastily be changed, for instance if a visiting public figure sends a replacement because they are unwell, within 25 seconds the message on the greeting sign is changed to the new name and it reveals the company is on the ball. This is satisfactory in public areas, yet when a client visits and you long to give them a stroll round in the plant, so they can see the up-to-the-minute manufacturing practices, this is an ideal opportunity in enforcing your service brand without delay on your client, as soon as they observe the colossal TVs in the factory areas they will surely be astounded, it also reveals that the business invests in new technology and is ahead of the game. But there is one issue even commercial displays are not designed to be used in areas were destructive air borne contaminants are, most manufactures have some kind of corrosive element in the air, from acids to carbon particles if these get into the back of the monitor it is only a matter of time until the monitor fails. The solution - is to set the display in a ruggedized LCD box, these guarantees IP65 protection, so they can even be washed down with high pressure water jets, ideal for any food manufacturing company. These can either be cooled or heated to offer the perfect climate. The LCD cabinet are rolled out with a complicated cooling system that also incorporates a filtration component, that filters all tiny air borne particles out, so the air entering the unit is fresh, cool air. Then the monitor within the protective enclosure can be fitted to gantries or ceiling mounted using a heavy duty fixings. Fitting digital advertising in a factory is no longer out of the ordinary, but also goes well in the field of facility computer systems, this is when standard pc's are utilized on a manufacturing plant floor to collect precious information about the current contracts being created. But what is considered necessary for protecting manufacturing pc systems? Well almost all the hardware will demand protecting from dust and fluid and the normal hazards that would make any computer useless. The device requiring defending range from the large HP networked printers to the computer, display and even the keyboard. Based on the goods produced in the factory will depend upon the protection needed, if the area is washdown the solution will need to be a waterproof solution to IP65 or a dust proof solution to IP54. Then there is the PC enclosure to reflect on, do you want to have all the hardware in one protective housing? If so, the all-in-one unit is perfect, this will care for the printer, PC, keyboard and display in one unit. Now an LCD cabinet is as common place on a manufacturing floor as is a PC enclosure, due to the hazard element of installing electronics in a hostile setting.
Article Source: http://www.onlinearticlessite.com
Max owns the leading manufacturer of PC enclosure for factory information system protection, as well as manufacturing a range of LCD enclosures for outdoor digital signage protection.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
