Home | Arts | Art Equipment
Safety should be of paramount importance documented in workplace. When completing a job, it is going to be necessary to use the right tools or equipment and operators would require the proper level of training. If these two rules are obeyed, then the amount of work-related accidents will always be kept to an absolute minimum and everyone are able to perform their jobs with confidence and awareness. Certainly, there will be equipment that would require a far larger degree of training. Some types of apparatus are still perfectly safe to try, but there are more potential hazards to be aware of. Elevated Work Platforms (EWPs) are a very good example of this because they have an added element of danger. Anyone who is working at heights should know what there're doing. There is very little room for error when you are a long way from the ground and one small mistake can have very large consequences. EWPs can be split into two main categories and there are specific training programmes in place for each. This is brief explanation of the two different groups and which qualifications are required to use the equipment in them. Powered Access Equipment As the name would suggest, this first group is barely home to powered EWPs, but also has its own sub-group of Mobile Elevated Work Platforms (MEWPs). To use any of this equipment you will be should possess the relevant operator credentials and the most widely recognised of those is the PAL (Powered Access Licence) card. This card is recognised by both the MCG (Major Contractors Group) and the HSE (Health and Safety Executive). To get a PAL card it will be essential to undergo proper IPAF training. The IPAF (International Powered Access Federation) is usually a non-profit organisation dedicated to promoting the safe use of powered access equipment. Yearly, over seventy-thousand operators are trained through the IPAF worldwide! When an operator has passed his/her IPAF Training, a PAL card will then be awarded. This will be valid for a five year period after which it is going to be necessary to re-train. Other powered access equipment certification is obtainable, but the PAL card is the most widely recognised type. Manual Access Towers and Platforms This second group is specifically for non-powered elevation equipment and courses for this type of machinery will obviously be very different to those in the first category. The most commonly used training services are those of PASMA (Prefabricated Access Suppliers’ and Manufacturers’ Association). In 2005, the PASMA Organisation was singularly the cause of the training of twenty-four thousand candidates! They are surely very highly respected and are seen by most as offering the very best courses in the safe use of manually operated lifting equipment. Once a trainee has successfully completed their course, they will receive a certificate of competency and a photo-card to use on-site. Again, the PASMA card is not the only type of certification for manual operators, but it is by far the most widely recognised.
Article Source: http://www.onlinearticlessite.com
Ryan James is a leading instructor of IPAF Training courses with over 10 years commercial experience.
Please Rate this Article
5 out of 54 out of 53 out of 52 out of 51 out of 5
Not yet Rated
